51ºÚÁÏ

AQA B7 (New GCSE Spec – Unit 4.7 – Ecology) Lesson: B7.8 - Impact of environmental change (TRIPLE ONLY + HT ONLY) Specification points covered = 4.7.2.4 - Impact of environmental change (Biology only) A fully resourced lesson covering how environmental changes impact on the distribution of species for the biology only route. The lesson includes information and tasks on all aspects of the impact of change covered in the specification. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA B7 (Paper 2, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA C7 (New Spec – Unit 4.7 – Organic chemistry) Lesson: C7.4 - Structure, formulae and reactions of alkenes (Triple only) Specification points covered = 4.7.2.1 – Structure and formulae of alkenes; 4.7.2.2 – Reactions of alkenes A fully resourced lesson about the structure, formulae and reactions of alkenes to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA B7 (New GCSE Spec – Unit 4.7 – Ecology) Lesson: B7.9 - Waste management, global warming and deforestation Specification points covered = 4.7.3.2 - Waste management 4.7.3.3 - Land use 4.7.3.4 - Deforestation 4.7.3.5 - Global warming A fully resourced lesson about Waste management, global warming and deforestation to be used when teaching the new biology specification GCSE of AQA B7 (Paper 2, Topic 3 - Ecology). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing

OCR 21st century science C1 lessons. All lessons to cover OCR C1 unit of work. Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.

Edexcel C3.12 - Titration. Full lesson covering the process of titrations and calculating the concentration or volume following a titration.

AQA Biology New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Inheritance, variation + evolution (4.6) All lessons to cover the TRILOGY lessons of topic 6 (paper 2, topic 2) – Inheritance, variation + evolution (4.6), from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.6.1.1 - sexual and asexual reproduction (B6.1 lesson) 4.6.1.2 - Meiosis (B6.1 lesson) 4.6.1.4 - DNA and the genome (B6.3 lesson) 4.6.1.6 - Genetic inheritance (B6.5 lesson) 4.6.1.7 - Inherited disorders (B6.6 lesson) 4.6.1.8 - Sex determination (B6.5 lesson) 4.6.2.1 - Variation (B6.9 lesson) 4.6.2.2 - Evolution (B6.10 lesson) 4.6.2.3 - Selective breeding (B6.11 lesson) 4.6.2.4 - Genetic engineering (B6.11 lesson) 4.6.3.4 - Evidence for evolution (B6.16 lesson) 4.6.3.5 - Fossils (B6.16 lesson) 4.6.3.6 - Extinction (B6.16 lesson) 4.6.3.7 - Resistant bacteria (B6.17 lesson) 4.6.4.1 - classification of living organisms (B6.18 lesson) To buy all of these lessons separately from my shop would cost £30.

AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.15 – Momentum and conservation (HT Only) Specification points covered = 4.5.7.1 - Momentum is a property of moving objects 4.5.7.2 - Conservation of momentum A fully resourced lesson covering Momentum and conservation (HT Only). The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

This is a revision power point to be used when revising the content of AQA Chemistry paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams. The power point includes: An overview of all topics on paper 2 Chemistry Recap of the required practical activities Information slides to quickly recap areas of paper 2 Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able. One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others. The main topic areas that are covered on this revision power point are : Rates of reaction - with required practical on this Collision theory Catalysts Equilibrium Separation Chromatography - with required practical Crude oil Fractional distillation alkanes cracking the atmosphere pollution the greenhouse effect human impact potable water purifying water life cycle assessments Amongst many other areas covered

AQA P1 (New GCSE Spec – Unit 4.1 – Energy) Lesson: P1.4 – Energy Efficiency Specification points covered = 4.1.2.2 - Efficiency A fully resourced lesson covering the energy efficiency for any energy transfer and calculating the efficiency using equations. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P1 (Paper 1, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

New AQA P6.3 (New Physics GCSE spec 4.6 - exams 2018) - Reflection and refraction of waves (with Required practical) AQA P6 (New GCSE Spec – Unit 4.6 – Waves) Lesson: P6.3 – Reflection and refraction of waves (with Required practical) Specification points covered = 4.6.1.3 - Reflection of waves (physics only) Required practical 9: Investigate the reflection of light by different types of surface and the refraction of light by different substances. (physics only) A fully resourced lesson about reflection and refraction of waves, to be used when teaching the new physics specification GCSE of AQA P6 - Triple only content. Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA Chemistry New Specification! Chemical analysis (Paper 2, topic 3) (4.8) All lessons to cover paper 2, topic 3 (4.8) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include the required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow to give extended feedback on their work in these tasks. Specification points covered (lesson by lesson): 4.8.1.1 (TRILOGY) - Pure substances 4.8.1.3 (TRILOGY) - Chromatography 4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine) 4.8.3.1 + 4.8.3.6 + 4.8.3.7 (TRIPLE) - Flame tests, instrumental analysis and flame emission spectroscopy 4.8.3.2 (TRIPLE) - Identifying cations using sodium hydroxide 4.8.3.3-5 (TRIPLE) - Identifying anions Required practical 6 + 7 covered in lessons.

Dynamic Equilibrium and the Haber process A whole lesson resource to guide learners the concept of dynamic equilibrium and the Haber process. Lesson includes progress checks to assess learning throughout the lesson and differentiated tasks that stretch the most able but also support those that struggle with the concept.

AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes) Lesson: C6.1 – Calculating rates of reaction Specification points covered = 4.6.1.1 - Calculating rates of reaction A fully resourced lesson about calculating the rates of chemical reactions to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides.

New AQA P6.7 (New Physics GCSE spec 4.6 - exams 2018) - Properties of electromagnetic waves (with Required practical) AQA P6 (New GCSE Spec – Unit 4.6 – Waves) Lesson: P6.7 – Properties of electromagnetic waves (with Required practical) Specification points covered = 4.6.2.2 - Properties of electromagnetic waves 1 4.6.2.3 - Properties of electromagnetic waves 2 Required practical - investigate how the amount of infrared radiation absorbed or radiated by a surface depends on the nature of that surface. This resource comes in two parts - part a goes through the actual content with regards to the properties of EM waves, and part b allows an opportunity to carry out the required practical for this topic. To be used when teaching the new physics specification GCSE of AQA P6 (Paper 2, Topic 2). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

New AQA P7.3 (New Physics GCSE spec 4.7 - exams 2018) - The motor effect + Fleming’s left-hand rule AQA P7 (New GCSE Spec – Unit 4.7 – Magnetism and electromagnetism) Lesson: P7.3 – The motor effect + Fleming’s left-hand rule Specification points covered = 4.7.2.2 - Fleming’s left-hand rule (HT only) 4.7.2.3 - Electric motors (HT only) A fully resourced lesson about The motor effect + Fleming’s left-hand rule, to be used when teaching the new physics specification GCSE of AQA P7 (Paper 2, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA C1.6 (new spec) - Developments of the periodic table. A fully resourced lesson about the periodic table to be used when teaching the New specification of AQA C1. Fully resourced with differentiated tasks and activities shown on power point slides.

AQA Chemistry New Specification! Paper 1, Topic 2, ALL LESSONS! All lessons to cover topic 2 (paper 1) – bonding, structure and the properties of matter, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. Complete set of resources, including full lesson power points and supporting differentiated worksheets (where needed) to teach this entire unit. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic: 4.2.1.1 – Chemical bonds 4.2.1.2 – Ionic bonding 4.2.1.3 – Ionic compounds 4.2.1.4 – Covalent bonding 4.2.1.5 – Metallic bonding 4.2.2.1 – Three states of matter 4.2.2.2 – State symbols 4.2.2.3 – Properties of ionic compounds 4.2.2.4 – Simple covalent substances 4.2.2.5 – Polymers 4.2.2.6 – Giant covalent substances 4.2.2.7 – Properties of metals and alloys 4.2.2.8 – Metals as conductors 4.2.3.1 – Diamond 4.2.3.2 – Graphite 4.2.3.3 – Graphene and fullerenes Chemistry Triple science lessons: 4.2.4.1 – Sizes of particles and their properties 4.2.4.2 – Uses of nanoparticles

AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry) Lesson: C3.4 - Amounts of substances in equations (Higher tier) Specification points covered = 4.3.2.2 Amounts of substances in equations (Higher tier) A fully resourced lesson about amounts of substances in equations to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA C4 (New GCSE Spec – Unit 4.4 – Chemical changes) Lesson: C4.7 - Titrations Specification points covered = 4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2) A fully resourced lesson about titrations to be used when teaching the New specification of AQA C4 (Paper 1, Topic 4). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA Biology New GCSE Spec (Paper 1 Topic 3 - exams 2018) – Infection and response (4.3) All lessons to cover the TRILOGY lessons of topic 3 (paper 1, topic 3) – Infection and response, from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.3.1.1 - Communicable (infectious) diseases (B3.1 lesson) 4.3.1.6 - Human defence systems (B3.1 lesson) 4.3.1.2 - Viral diseases (B3.2 lesson) 4.3.1.3 - Bacterial diseases (B3.2 lesson) 4.3.1.4 - Fungal diseases (B3.2 lesson) 4.3.1.5 - Protist diseases (B3.2 lesson) 4.3.1.7 - Vaccination (B3.3 lesson) 4.3.1.8 - Antibiotics and painkillers (B3.3 lesson) 4.3.1.9 - Discovery and development of drugs (B3.4 lesson)