Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
This is a revision power point to be used when revising the content of AQA Chemistry paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams.
The power point includes:
An overview of all topics on paper 2 Chemistry
Recap of the required practical activities
Information slides to quickly recap areas of paper 2
Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able.
One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others.
The main topic areas that are covered on this revision power point are :
Rates of reaction - with required practical on this
Collision theory
Catalysts
Equilibrium
Separation
Chromatography - with required practical
Crude oil
Fractional distillation
alkanes
cracking
the atmosphere
pollution
the greenhouse effect
human impact
potable water
purifying water
life cycle assessments
Amongst many other areas covered
AQA Chemistry New GCSE Spec (Paper 2 Topic 1 - exams 2018) β The Rate and Extent of Chemical Change (4.6)
All lessons to cover topic 6 (paper 2, topic 1) β The rate and extent of chemical change, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy and triple specification points and lessons:
4.6.1.1 - Calculating rates of reaction (C6.1 lesson)
4.6.1.2 - Factors which affect the rate of chemical reactions (C6.2 lesson)
4.6.1.3 - Collision theory and activation energy (C6.2 lesson)
REQUIRED PRACTICAL 5 - C6.3 lesson
4.6.1.4 - Catalysts (C6.4 lesson)
4.6.2.1 - Reversible reactions (C6.5 lesson)
4.6.2.3 - Energy changes and reversible reactions (C6.5 lesson)
4.6.2.3 - Equilibrium (C6.6)
4.6.2.4 - The effect of changing conditions on equilibrium (HT only) (C6.6 lesson)
4.6.2.5 - The effect of changing concentration (HT only) (C6.6 lesson)
4.6.2.6 - The effect of temperature changes on equilibrium (HT only) (C6.6 lesson)
4.6.2.7 - The effect of pressure changes on equilibrium (HT only) (C6.6 lesson)
AQA C3 (New Spec β Unit 4.3 β Quantitative chemistry)
Lesson: C3.8 - Percentage Yield (triple only)
Specification points covered = 4.3.3.1 Percentage yield (Triple Only)
A fully resourced lesson about percentage yield to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C2.3 - Writing ionic formulae. A full lesson about how to write ionic formula to be used when teaching the AQA additional science unit. Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New Specification!
All lessons to cover topic 1 (paper 1) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
Specification points covered:
4.1.1.1 - atoms, elements and compounds
4.1.1.2 - Mixtures
4.1.1.3 - Scientific models of the atom
4.1.1.4 - relative electrical charges of subatomic particles
4.1.1.5 - size and mass of atoms
4.1.1.6 - electronic structure
4.1.2.1 - The periodic table
4.1.2.2 - development of the periodic table
4.1.2.3 - metals and non-metals
4.1.2.4 - Group 0
4.1.2.5 - Group 1
4.1.2.6 - Group 7
Chemistry Triple science lessons:
4.1.3.1 + 2 - Transition metals and their properties
Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.
This is a revision power point to be used when revising the content of AQA Chemistry paper 1 - it covers the key areas of both the trilogy and chemistry only routes - these are clearly separated out and so makes it easy to find suitable content activities for your groups.
The power point includes:
Specification points to discuss
All required practical activities - specification points along with example methods and questions for each.
Triple only content
Recall questions for each topic of chemistry paper 1 (with answers) for retrieval practice.
Content slides covering the key areas of each topic to discuss with your groups.
Various differentiated revision activities for each topic (with answers) for students to complete as you progress through.
The power point is designed to be used in revision lessons and designed in a way that key areas of weakness for individual groups can be found and addressed easily.
AQA C10 (New GCSE Spec β Unit 4.10 β Using Resources)
Lesson: C10.1 β Using the Earth's resources and sustainable development
Specification points covered =
4.10.1.1 - Using the Earth's resources and sustainable development
A fully resourced lesson about using the Earth's resources and sustainable development to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C4 (New GCSE Spec β Unit 4.4 β Chemical changes)
Lesson: C4.3 - Displacement reactions
Specification points covered =
4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson)
A fully resourced lesson about displacement reactions (oxidation and reduction in terms of electrons) to be used when teaching the New specification of AQA C4 (Paper 1, Topic 4).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C7 (New Spec β Unit 4.7 β Organic chemistry)
Lesson: C7.4 - Structure, formulae and reactions of alkenes (Triple only)
Specification points covered = 4.7.2.1 β Structure and formulae of alkenes; 4.7.2.2 β Reactions of alkenes
A fully resourced lesson about the structure, formulae and reactions of alkenes to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
OCR 21st century science C1 lessons. All lessons to cover OCR C1 unit of work. Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.
A range of power points to teach Edexcel C3 Topic 3, covering electrolysis, electrolytic process and the uses of electrolysis. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic.
AQA A level chemistry - Physical chemistry
Topic 1 - Atomic structure, lesson 3 - Electron configuration and ionisation energies
Specification points covered =
3.1.1.3 - Electron configuration
Fully resourced lesson covering the following with information and tasks:
Electron configurations of atoms and ions up to Z = 36 in terms of shells and sub-shells (orbitals) s, p and d.
Ionisation energies.
Students should be able to:
β’ define first ionisation energy
β’ write equations for first and successive ionisation energies
β’ explain how first and successive ionisation energies in Period 3 (NaβAr) and in Group 2 (BeβBa) give evidence for electron configuration in sub-shells and in shells.
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA A level chemistry - Physical chemistry
Topic 3 - Bonding, lesson 2 - Covalent Bonding
Specification points covered =
3.1.3.2 - Nature of covalent and dative covalent bonds
Fully resourced lesson covering the following with information and tasks:
A single covalent bond contains a shared pair of electrons. Multiple bonds contain multiple pairs of electrons.
A co-ordinate (dative covalent) bond contains a shared pair of electrons with both electrons supplied by one atom.
Students should be able to represent:
β’ a covalent bond using a line
β’ a co-ordinate bond using an arrow.
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA Chemistry New Specification! Chemical analysis (Paper 2, topic 3) (4.8)
All lessons to cover paper 2, topic 3 (4.8) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include the required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow to give extended feedback on their work in these tasks.
Specification points covered (lesson by lesson):
4.8.1.1 (TRILOGY) - Pure substances
4.8.1.3 (TRILOGY) - Chromatography
4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine)
4.8.3.1 + 4.8.3.6 + 4.8.3.7 (TRIPLE) - Flame tests, instrumental analysis and flame emission spectroscopy
4.8.3.2 (TRIPLE) - Identifying cations using sodium hydroxide
4.8.3.3-5 (TRIPLE) - Identifying anions
Required practical 6 + 7 covered in lessons.
Dynamic Equilibrium and the Haber process
A whole lesson resource to guide learners the concept of dynamic equilibrium and the Haber process. Lesson includes progress checks to assess learning throughout the lesson and differentiated tasks that stretch the most able but also support those that struggle with the concept.
AQA C1.6 (new spec) - Developments of the periodic table. A fully resourced lesson about the periodic table to be used when teaching the New specification of AQA C1.
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New Specification! Paper 1, Topic 2, ALL LESSONS!
All lessons to cover topic 2 (paper 1) β bonding, structure and the properties of matter, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
Complete set of resources, including full lesson power points and supporting differentiated worksheets (where needed) to teach this entire unit.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic:
4.2.1.1 β Chemical bonds
4.2.1.2 β Ionic bonding
4.2.1.3 β Ionic compounds
4.2.1.4 β Covalent bonding
4.2.1.5 β Metallic bonding
4.2.2.1 β Three states of matter
4.2.2.2 β State symbols
4.2.2.3 β Properties of ionic compounds
4.2.2.4 β Simple covalent substances
4.2.2.5 β Polymers
4.2.2.6 β Giant covalent substances
4.2.2.7 β Properties of metals and alloys
4.2.2.8 β Metals as conductors
4.2.3.1 β Diamond
4.2.3.2 β Graphite
4.2.3.3 β Graphene and fullerenes
Chemistry Triple science lessons:
4.2.4.1 β Sizes of particles and their properties
4.2.4.2 β Uses of nanoparticles
AQA C3 (New Spec β Unit 4.3 β Quantitative chemistry)
Lesson: C3.4 - Amounts of substances in equations (Higher tier)
Specification points covered = 4.3.2.2 Amounts of substances in equations (Higher tier)
A fully resourced lesson about amounts of substances in equations to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides.
