51ºÚÁÏ

This is a resource for the new AQA GCSE Biology ‘Infection and Response’ module. The lesson begins with an introduction to the structure of fungi and protists and some of the diseases they can cause in plants and animals. Pupils can then stick a piece of information in their books which outlines the rose black spot fungal disease of plants and the protist disease of malaria in humans. Pupils should use this information to work their way through the levelled tasks on the board. You can then go through the answers to these questions and pupils can self-assess or peer-asses their work. The mid-lesson progress check is an activity where pupils match definitions to the correct key words, pupils can self-assess their work. In the next activity pupils can create a pamphlet/poster aimed at patients going abroad to a country where they could be at risk of contracting malaria. Pupils can work through the tasks for each of the parts of the ABCD approach in order to complete this poster. Pupils can then peer-assess their work. Plenary is a quick quiz pupils can complete at the back of their books. Other lessons from the ‘Infection and Response’ unit can be found in my TES shop. Thanks :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience The first task is for pupils to think > pair > share the factors which may cause a contribution of carbon dioxide into our atmosphere. Pupils can create a mind map in their books and then discuss their ideas as a table and then as a class. The next PowerPoint slide reveals some of the main factors which contribute to an increase in carbon dioxide levels in our atmosphere, pupils can check their work against these answers. For the next task pupils will be required to watch a video about the greenhouse effect and answer questions in their books, this task can be self-assessed using the answers provided once complete. Using this information pupils will then be asked to fill in the blanks on a diagram depicting the greenhouse effect, pupils will be given captions to write into the correct boxes on their worksheet. This can be self-assessed once it has been completed. Next pupils will be given a set of data on the mean world temperature change from 1960 to present day, students will be required to plot the data on a graph, describe the pattern of the graph and explain why the graph may be showing this pattern. The next part of the lesson focuses on global warming, students will firstly be given a set of questions which they will need to answer whilst watching a video. This work can then be self-assessed using the answers provided. For the very last task pupils will be given a card of information each detailing an environmental factor and it’s impact on living organisms. Pupils will need to wander around the room and share information with each other to complete their table of environmental factors. The plenary task is for pupils to identify what the questions might be for a set of answers provided on the PowerPoint presentation. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience The lesson begins with a task whereby pupils need to use their phones/laptops to research the dates in which different metals were discovered. They should complete the table in their books and then write a sentence to summarise the relationship between the date in which the metal was discovered and it’s reactivity. The first part of the lesson now focuses on extraction of copper from copper-rich ores, two methods are firstly introduced - smelting and extraction using sulfuric acid. Pupils will then be given a set of information on these processes and will need to answer a set of questions, once complete pupils can self-assess their work using the answers provided. The next part of the lesson will require pupils to undertake a practical investigation whereby they will extract copper from an ore called malachite, an ore which contains copper carbonate. Students will need to follow the instructions provided and will then need to note down their observations of the electrode at which the copper will collect. A summary and explanation of the results will then be provided via the PowerPoint presentation for pupils to check their work. Lastly, pupils will watch a video about low-grade copper ores and the processes of phytomining and bioleaching for the extraction of copper from such ores. Pupils will need to answer a set of questions whilst watching this video, this work can be self-assessed using the mark scheme provided. The plenary task is for pupils to write a list of key words from what they have learned in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please email me at swift.education.uk and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes, electrolysis and energy changes’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience Students will firstly be shown a set of images, students will have to decide which are examples of an alkali/base and which are examples of acids. Next, students will watch a video on acids/alkalis and will need to answer a set of questions, after which they can self-assess their work using the mark scheme provided. The next part of the lesson focuses on pH, students are firstly reminded of the importance of the pH scale and will then need to complete an investigation to identify the pH of different substances. Students can use the practical sheet provided to complete this task, including the results table to record their results. The next part of the lesson looks at the difference between concentrated and dilute solutions, in terms of particles and in terms of risk/hazards when handling concentrated acids. Students will then need to summarise what they have learned with a fill-in-the-blank task, this work can be self-assessed using the mark scheme provided. The final part of the lesson pupils will focus on the difference between strong and weak acids in terms of ionisation. Students will also look at how pH values are related to the concentration of H+ ions, students will need to copy and complete a table to show the concentration of H+ ions per mol dm3 for each pH value, this work can then be self-assessed using the mark scheme provided. The plenary task is a ‘Pick a plenary’ task - pupils will need to either write a twitter message to summarise what they have learnt or write 5 quiz questions on the topics studied in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy. The lesson begins with an introduction to the law of the conservation of energy, students are told that energy cannot be created or destroyed but it can be stored and transferred. Next, students are introduced to the five main energy stores, students are asked to match the correct names to the photos displayed. This task can then be self-assessed using the mark scheme provided. Next, students are introduced to the ways in which energy can be transferred - via light waves, sound waves and electricity. They will be shown an energy transfer diagram, depicting the energy transfers which take place within a torch. Once students have seen the complete diagram, they will then have a go at completing it themselves, using the statements provided. This task can the be marked against the mark scheme provided. Students will then complete two further energy diagrams to display the energy transfers taking place within a candle and TV. The answers to this task are also included in the PowerPoint presentation so students can self-assess their work using the mark scheme provided. Lastly, students will complete an investigation into the height a ball bounces back up to after it has been dropped from a height. Students will work in groups of three, following the instructions provided on the PowerPoint to complete the results table provided. Students will then need to answer a set of questions using the data they collected from the investigation. This can be self-assessed using the mark scheme provided. The plenary task requires students to complete one of the sentence starters, to summarise what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW for the higher tier, biology only specification. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience Pupils will firstly be given, in pairs, information about Lamarck’s and Darwin’s theories of evolution. In pairs students will need to explain each theory to each other and discuss the merits and downfalls of each. The next task required pupils to summarise the main points of each of the scientists theories in a table, this work can be self-assessed against the answers provided. Pupils will then be asked to consider the flaws in Lamarck’s theory, pupils will be asked to come up with a question to ask Lamarck about his theory and to discuss in pairs what they think the potential flaws of this theory could be. Once you have gone through pupils’ ideas as a class you can reveal some of the problems with this theory of evolution. The next part of the lesson focuses on Darwin, firstly pupils will be asked to copy and complete sentences to summarise the main ideas from Darwin’s theory of evolution. Once this task is completed and marked, pupils will go on to look at why Darwin’s ideas were not published or accepted straight away. Pupils will be provided with some information but they will also need to use their own knowledge to answer a set of questions provided on a worksheet. Once this task is complete, a detailed mark scheme has been provided for pupils to either self or peer assess their work. The very last task is an exam-style question, pupils will need to complete this in their books (at the back of books without notes for a stretch and challenge) and self or peer-assess using the mark scheme once they have finished. The plenary task is for pupils to summarise what they have learnt in the lesson using the key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Rates of Reaction’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task whereby students need to consider what it means for a reaction to be in ‘equilibrium’ . After a class discussion, the definition of a reversible reaction (in a closed system) to be at equilibrium is revealed to the class, which they can note down in their books. This is further explained using a set of diagrams to depict what happens to the concentration of reactants and products during the course of a reversible reaction. Students can sketch a graph into their book to show how the equilibrium of a reversible reaction is reached. The next task focuses on ‘Le Chatelier’s Principle’, students are firstly introduced to the idea that the equilibrium of a reversible reaction can be altered by changing the conditions of that reaction, i.e. an increase in temperature. Students will then be shown a set of demonstrations (video links included) for each they will need to note down their observations, identify the conditions which are changing and match the correct reaction to the correct word equation. Pupils will complete a worksheet for this task, which will be assessed using the mark scheme provided. For the next part of the lesson, students will watch a video on the effect of pressure on equilibrium and answer a set of questions. These questions can be self-assessed using the answers provided on the PowerPoint. Students will now ‘Think > Pair > Share’ the effect of an increase in temperature on the equilibrium of a reversible reaction, the answer is then revealed to pupils using an example. Pupils will now complete a ‘Quick Check’ task where they will be required to answer a set of questions about the reversible reactions and the effect of altering conditions on dynamic equilibrium. Pupils can self-assess their work using the answers provided on the PowerPoint. Finally, students will need to complete a summary sheet on the effect of pressure and temperature on the equilibrium of a reversible reactions, students can self assess their work using the answers provided. The plenary task requires pupils to write down three sentences to summarise what they have learnt in today’s lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Organisation’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience This lesson begins by identifying what metabolic rate is and then asking pupils to think about what important metabolic reactions take place within organisms. Pupils can discuss and try and come up with a brain storm in their books. Pupils then learn about the role of the liver by watching a video and answering questions at the same time, once pupils have finished completing this task they can assess their work using the answers provided on the PowerPoint slide. Next, pupils need to specifically learn about the role of the liver in clearing lactic acid from the body. They will be given an information card and will need to answer some questions using this information, once finished they can mark or peer assess their work. The final activity is an exam-style question about glycogen in the liver, pupils can answer this question in silence at the back of their books (for higher abilities this would be most suitable) or for lower abilities you may allow them to discuss and answer in pairs. Once completed they can mark their worn work. The plenary activity is a list of answers, pupils need to come up with the questions to which these words are the answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience This lesson starts by pupils watching a video about the organs and hormones involved in the menstrual cycle, during which time they will need to answer questions on their worksheet. This work can then be red-pen assessed once they have finished. Pupils are then shown a set of diagrams which goes through the steps involved in the menstrual cycle, using the diagrams pupils are asked to discuss in pairs what they think is happening. After a short class discussion pupils will be given the series of diagrams and a set of jumbled statements, they will need to match the statements to the correct diagram to accurately describe what is happening in the menstrual cycle. **For higher ability pupils you may want to just give them a set of key words for them to write their own statements below the diagrams**. To summarise the role of each of the hormones in the menstrual cycle the next activity is a table and a set of key words, pupils need to fill in the blanks using the key words to correctly describe the role of each hormone. This can be assessed using the answers provided in the PowerPoint presentation. The next activity is a true or false activity on what pupils have learnt about this lesson, the plenary activity is a past-paper question on the hormone levels during pregnancy. The mark scheme for both these activities is provided for pupils to red-pen their work. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes and electrolysis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience Firstly, students are introduced to the term ‘Electrolysis’ including a description of the process, a list of key words associated with the process and a diagram. Students will now watch a video about the process, using which students will need to answer a set of questions. After they have completed this task they will be able to self-assess their work using the mark scheme provided. Students will now complete a fill-in-the-blank task to summarise what they have learnt so far, this can be assessed using the answers provided. Pupils are now shown a diagram to demonstrate what is happening at the anode and cathode during the electrolysis of lead bromide, pupils will need to use the list of key words provided to complete captions to describe what is happening at each electrode. Students can check their work against the example answers provided in the PowerPoint. Next, pupils are shown the ionic half-equations for the reactions occurring at the anode and cathode during the electrolysis of lead bromide. Pupils will then need to identify the products at each electrode, as well as complete the ionic half-equations, for the electrolysis of a set of ionic compounds: lihtium oxide, sodium chloride and magnesium chloride. Once complete, pupils can self-assess their work using the answers provided. The next part of the lesson focuses on the products formed at each electrode when the ionic compound is within an aqueous solution. Students will be shown what will happen at the anode and at the cathode, using this information they will need to predict the products formed at the anode/cathode during the electroysis of set of solutions. Students can self-assess their using using the answers provided. The final task focuses on the electrolysis of brine, students will watch a video and will need to answer a set of questions using the information provided in the video. After completing this task, pupils will need to self-assess their work using the answers provided. The plenary task requires pupils to write a ‘Whatsapp’ message to a friend to explain what they have learnt this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience The first part of the lesson outlines the definition of deforestation and some key facts and figures about the destruction of forests around the world. The next task is for pupils to discuss why they think rainforests may be being cut down & the consequences this might have on a local & global scale. The next two slides outlines the four main reasons why rainforests are being destroyed and some of the consequences of their destruction, pupils can check their work against the answers provided. The next task requires pupils to watch a video and answers questions using the information provided in the video, once they have completed the question they can asses their work using the answers provided. Pupils will now be required to complete a recap task on the carbon cycle, they will be given a worksheet which they will be asked to fill in using the captions provided on the PowerPoints slide. Once this has been completed pupils can assess their work using the answers on the PowerPoint slide. The next part of the lesson focuses on the importance of peat, firstly pupils will be given a set of information about peat bogs and they will be required to answer questions using this information. This work can be self or peer assessed once it has been completed. The final task is for pupils to answer an exam-style question on the carbon cycle and deforestation. Pupils can assess their work using the mark scheme provided. The plenary task is for pupils to choose words from a list of key words to formulate three summary sentences on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: /teaching-resources/shop/SWiftScience. The lesson begins with an introduction to variation and what it means to belong to a species. Students will then be shown images of four different people and will be asked to note down the ways in which the people are different from one another and why. This will lead into the next PowerPoint slide which shows images of characteristics which are inherited - lobed/lobeless ears, eye colour, natural hair colour. Students can make a note of these in their books as examples. Next, students will be shown images of characteristics which could be due to the environment - weight, tattoos/scars, piercings, strength. Students will now focus on inherited variation, they will be asked to think about their own characteristics and then compare this to a family member - parents/grandparent. Students should then complete a mind map of the characteristics they have inherited from different people, e.g. I have inherited my eye colour from my Dad. If complete, there is an ‘extra challenge’ question for students to consider why they are not identical to either one of their parents. Next, students will be shown examples of environmental factors which lead to certain types of environmental variation. For example, where you grow up and the football team you support. Students will then need to complete a task which requires students to match the correct environmental factor with the correct type of environmental variation. This task can then be marked and assessed using the mark scheme provided once complete. The last task requires students to consider a world in which there is no variation, where everyone looked the same as one another. Students will then need to describe the advantages and disadvantages of this world and explain whether it would be a world they would like to live in. The plenary task requires students to spend a minute talking the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical Analysis’ SoW. Firstly, students will conduct an investigation which carries out flame tests to check for the presence of different positive ions. Pupils will need to follow the method provided and record their results in a table in their books, once this task is complete they can self-assess their work using the mark scheme provided. Pupils will then watch a video on the use of sodium hydroxide solution in the test for positive ions, they will need to answer a set of questions using the information provided in the PowerPoint presentation. The answers to this task are provided in the PowerPoint so students can self-assess their work. Next, pupils will need to complete a flow diagram to demonstrate the steps involved in identifying a range of positive ions by using sodium hydroxide solution, this task can be self-assessed using the mark scheme provided. To assess their knowledge of flame tests and use of sodium hydroxide solution in identifying positive ions, pupils will need to fill in the blanks in a summary table. This work can be self-assessed using the answers provided. The next part of the lesson will focus on negative ions, firstly students will watch a video and will need to answer a set of questions using the information provided in the video. This work can self-assessed using the answers provided. Lastly, students will practice writing ionic equations for reactions which lead to the identification of either positive or negative ions before a final set of summary questions. Answers to these tasks are provided for self or peer assessment. The plenary task is for pupils to write a set of quiz questions to test their peers knowledge of what they have learned during the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience Pupils will firstly come up with a mind map of ideas about why water is such an important resource, they can discuss with their partner and write their ideas in their books. Some of the reasons can then be revealed via the PowerPoint presentation and pupils can assess their work - making corrections where necessary. Pupils are then shown a quick recap of the stages involved in the water cycle, before beginning to look at the treatment of fresh water and purification of salt water. Students will be given a worksheet of questions, around the room will be information sheet on how fresh water is turned into potable, drinking water and how sea water is purified. Pupils will need to read the information posters to answer their questions, this work can then be self-assessed using the mark scheme provided. The next part of the lesson will focus on waste water treatment, pupils will watch a video on the steps involved with sewage treatment. Pupils will answer a set of questions whilst watching the video, this work can then be self-assessed using the answers provided. The final task is for pupils to complete an exam-style question on this topic, they can answer in their books and either self or peer assess using the mark scheme provided. Finally, pupils will be given a set of answers, they will need to come up with questions which match these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW and specifically designed for the higher tier GCSE chemistry students. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience The lesson begins with students learning how to calculate the number of moles of a gas when you know the molar gas volume. Students will then work their way through a set of questions using this calculation, for latter questions students will need to rearrange the equation. This work can then be assessed using the answers provided in the PowerPoint presentation. The next part of the lesson focuses on calculating the masses of gaseous reactants and products, firstly students are shown a worked example. The next task is for pupils to watch a video, using which they should answer a set of questions. Once this task has been completed students shoudl mark their work using the answers provided. Using the formula they have learnt whilst watching the video, they should now complete a set of questions on a specific chemical reaction - this required students to calculate the volume of gases produced or the mass of a reactant needed to produce a certain amount of a gas product. This work can be self-assessed using the answers provided in the PowerPoint presentation. The next task is a further set of problems requiring students to calculate the volume of gaseous reactants or products given a balanced symbol equation for a chemical reaction. The last task requires pupils to come up with 4 exam questions on the topic of gas volumes, they should also include a mark scheme for each of the questions. Once they have competed their questions they should swap with the person next to them and complete their partners questions, these can be self or peer-assessed using the mark schemes they have written. The plenary task is for pupils to write a WhatsApp message to their friends to tell them what they have learnt about this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Inheritance, variation and evolution' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience The task begins with pupils being asked to think > pair > share the specific characteristics that farmers might find favourable in cows, crops, chicken and sheep. The next activity involves pupils watching a video on selective breeding and how this process works, pupils will need to answer questions as they watch the video. The work can be assessed when they finish using the mark scheme provided. Pupils will now understand the process of selective breeding, the next task requires pupils to choose two dogs from a selection of dog breeds (pictures provided) to breed together in order to produce offspring with the traits the student would like. They can sketch a flow diagram to demonstrate how thus process occurs. The next activity is a worksheet on chicken breeds, once students have completed they can use the mark scheme to self or peer assess their work. The final activity focuses on the problems with selective breeding, pupils are provided with some information which could be tag-read as a class. This can then be used to answer some quick-check questions. Once the questions are complete this work can be self-assessed using the answers provided. The plenary task is for pupils to use a list of key words to write a summary sentence about what they have learnt from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Forces in Action’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: /teaching-resources/shop/SWiftScience This lesson begins with an introduction to force diagrams, students are given some information about how arrows can show the direction and size of forces acting upon an object. Students will then need to add force arrows to a diagram of a brick falling, this task can then be checked against the answer provided. Students are now shown a ‘Tug of war’ diagram, students are asked to ‘Think > Pair > Share’ their ideas about which side would win and why. After a short class discussion, students are now introduced to the idea of balanced and unbalanced forces, using ‘tug of war’ images as examples. Students are then given some information outlining how the motion of an object is affected by balanced/unbalanced forces acting upon it. Students will now complete a forces circuit to consider the type and size of forces acting upon different objects in the circus, students will need to identify the type/size of the forces and decide whether they are balanced or unbalanced. This task can be self-assessed once it is complete. Students will now be introduced to the definition of resultant forces, and will be shown some examples of how to calculate resultant force using ‘tug of war’ examples again. Students will now complete a couple of tasks to assess their knowledge of what they have learned so far on resultant forces, both tasks can be self-assessed using the mark scheme provided in the PowerPoint presentation. Lastly, students are shown how to draw ‘Free-body Force Diagrams’, an example is given before students are asked to draw their own onces using the two scenarios provided. The work can be marked and corrected using the mark scheme provided. The plenary task requires students to write a Whatsapp message to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)